Are you searching for information and facts about What Would Cause My Electric Water Heater to Stop Working??
Many modern-day homes take advantage of an electric hot water heater for their heater, due to its ease as well as ease of use. Nonetheless, much like any other electrical devices, issues may develop with its usage, all of a sudden. It can be truly irritating to get up to a cool shower rather than a warm one or having your bath with water that isn't hot sufficient or even also hot. Whatever the situation may be, hot water heater problems can be rather nerve-racking. The good news is, we've made a checklist of possible options to your water heater problems. There are a number of aspects that could trigger many of these issues, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety and security. Whatever the issue is, getting it dealt with should not present too much of a problem if you adhere to these steps:
Inspect Your Power Supply:
As standard as this may appear, it is very needed. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly retires is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply turn it on and off again. Replace any type of busted or worn-out fuse. Evaluate the device with power after these changes to see if it's now functioning.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that attempt checking out your heating element if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any of them is malfunctioning, change that part and then inspect whether the warm water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm sufficient, you may need to check the temperature setups on your top thermostat. Make certain the breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This need to aid heat the water. Turn the circuit breaker back on and check if the issue has been fixed.
Call An Expert:
If after replacing all malfunctioning components as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to call a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have actually been changed or it might be undersized for the amount of hot water needed in your home. Whatever the case may be, a professional plumber would certainly aid address the trouble.
Verdict
Water heater problems are not always major. Many of them result from minor problems like a blown fuse or worn-out heating element. Changing the damaged parts ought to do the trick. Nonetheless, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you enjoyed our part on Hot Water Heater Repair. Thank you so much for taking a few minutes to read our content. Do you know someone else who is very much interested in the niche? Why not promote it. I thank you for reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Estimate Free